Insights and Tips for Assessment Validation: How to Validate Assessments
Insights and Tips for Assessment Validation: How to Validate Assessments
Blog Article
Once RTOs receive registration, they must oversee many aspects such as annual declarations, AVETMISS reporting, and marketing compliance. Of all these duties, validation is frequently the most daunting.
We have numerous articles on validation, but let's go back to the term itself. ASQA defines validation as a quality review of the assessment process.
Validation is essentially about verifying the accuracy of parts of an RTO's assessment process and spotting areas needing improvement. Understanding its key components can make it less daunting.
As per the 2015 SRTOs Clause 1.8, RTOs are required to ensure their assessment systems, including RPL, meet training package requirements and follow the Principles of Assessment and Rules of Evidence.
The standards mandate two types of validation.
The first assessment validation type verifies that your RTO's assessments adhere to the training package requirements within your scope.
The next validation type confirms assessments are conducted following the principles of assessment and rules of evidence.
This suggests we perform validation both before and after the assessment. This article will concentrate on the first type—assessment tool validation.
The Basics of the Two Types of Assessment Validation
A Deep Dive into Assessment Validation
As mentioned earlier and in one of our previous blog posts, validation is split into two stages: (1) assessment tool validation and (2) post-assessment validation.
Pre-assessment validation, or assessment tool validation, is concerned with the first part of the clause, which ensures all unit requirements are met and that workbooks are fully compliant.
Post-assessment validation, in contrast, is about ensuring the implementation side, where Registered Training Organisations conduct assessments according to the Principles of Assessment and Rules of Evidence.
Our focus in this article will be on assessment tool validation.
How Assessment Tool Validation is Conducted
Having outlined the two types of validation, it’s time to dive into assessment tool validation.
When Assessment Tool Validation Should Be Done
The goal of assessment tool validation is to make sure all elements, performance criteria, and performance and knowledge evidence are addressed by your assessment tools.
Thus, whenever new learning resources are purchased, assessment tool validation should be conducted before students use them.
There's no requirement to wait for the next validation schedule in your 5-year cycle. Validate new resources promptly to ensure they’re appropriate for students.
Nonetheless, there are other reasons to conduct this type of validation. Perform assessment tool validation when you:
- resources are updated by you
- new training products get added on scope
- you review your course against training product updates
- when learning resources are identified as a risk during your risk assessment
The Australian Skills Quality Authority employs a risk-based approach for regulating RTOs and expects regular risk assessments. Therefore, student complaints about learning resources are an ideal time to conduct assessment tool validation.
Selecting Training Products for Validation
Remember, this validation aims to ensure all learning resources are compliant before use. All RTOs are expected to validate all unit resources.
Resources Needed to Start Assessment Tool Validation
Educational Materials
To conduct assessment tool validation, you will need the entire suite of your learning resources:
Mapping tool – start with this document. It illustrates which assessment items address unit requirements, making validation quicker.
Learner/student workbook – assess its appropriateness for use as an assessment tool. Verify clear instructions and adequate answer fields. This is often a gap.
Assessor guide/marking guide – check that instructions for assessors are adequate and that there are clear benchmarks for each assessment item. Clear benchmarks are essential for reliable assessment outcomes.
Other related resources – such as checklists, registers, and templates created independently from the workbook and marking guide. Validate them to ensure they are suitable for the assessment task and address unit requirements.
Validation Group
Clause 1.11 details the requirements for validation panel members, noting that validation can be conducted by one or more people. Generally, RTOs require participation from all trainers and assessors and may include industry experts.
Your validation panel must, as a group, possess:
Vocational competencies and current industry skills applicable to the unit being validated
Recent knowledge and skills in vocational teaching and learning
One of these training and assessment qualifications:
TAE40116 Certificate IV in Training and Assessment or an equivalent successor
Validation tool/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
A validation tool assists with the validation process and documentation. It makes it easier to view how each assessment item aligns with each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
At the same time, it acts as documentation that you have validated your resources before allowing student use.
ASQA does not provide a recommended or required template for assessment tool validation, but many templates are available online. These tools generally have validators review the tools as a whole to determine if they meet the principles of assessment.
Principles of Assessment Checklist Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable
While these templates simplify the validation process, they can introduce judgment errors because there is insufficient space for comments on each assessment item.
It is advisable to use a more detailed template to inspect each unit requirement and its corresponding assessment items. Below is an example:
Element Performance Criteria Assessment Guidelines Standards Assessment Instrument Rectification Recommendations
What do you Need to Check?
What Needs Inspection?
As we explained in our blog post Common Problems In Assessment Tools, it’s vital that your assessment tools enable trainers to follow assessment principles and evidence rules.
Assessment Basic Principles
Fairness – Does the assessment process ensure equal opportunity and access for everyone?
Flexibility – Does the assessment offer various ways to demonstrate competence according to different needs and preferences?
Validity – Does the assessment assess what it is intended to assess? Is it a valid tool for measuring the required skill or knowledge?
Reliability – Will the assessment yield the same results every time, no matter who conducts the training? Will different assessors make the same decision on skill competence?
Core Rules of Evidence
Validity – Is the evidence showing that the candidate has the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is the evidence enough to confirm the learner has the required skills and knowledge?
Authenticity – Is the assessment tool ensuring that the work is the candidate’s own?
Currency – Are the assessment tools based on current units of competency and up-to-date industry practices?
Even though these are regularly addressed in VET professional development and nationally recognised training, numerous tools fail to meet these requirements.
To prevent using learning resources that do not meet some unit requirements, make sure to follow these guidelines:
Practice What You Preach
Focus on the verbs used in the unit requirements and make sure they are addressed by the assessment item. For example, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement requires students to:
Perform each of the following tasks at least once with two different babies under 12 website months old in a safe environment, using age-appropriate verbal and non-verbal communication per service and regulatory requirements:
nappy changing
bottle preparation, feeding infants from bottles, and cleaning equipment
prepare solid foods and feed infants
respond appropriately to baby signs and cues
prepare infants for sleep and soothe them
monitor and promote physical exploration and gross motor skills suitable for the age
Having students explain changing nappies for babies under 12 months old doesn’t directly address the unit requirement. Unless it’s meant to assess underpinning knowledge (i.e., knowledge evidence), students should be carrying out the tasks.
Plurals Matter!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Pay attention to the numbers. In our CHCECE032 example, one unit requirement asks students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby isn’t enough.
Full or Not Competent
Pay attention to lists. Again, as illustrated above, if students perform just half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Add More Specificity
Every assessment item should have clear and specific benchmark answers to guide the assessor’s judgment on student competence. Thus, make sure your instructions do not confuse students or assessors. For example:
What kind of information can be included in a work package?
What kinds of information can be included in a work package?
Answers might include:
Compulsory resources
Associated costs
Duration of activities
Appointed roles and responsibilities
If an assessment item requires multiple answers, specify how many answers are needed from a student. This ensures your assessment is reliable, and the evidence obtained is valid.
The same is true for assessment items with double-barrelled questions or those asking for multiple answers at once. Such questions can confuse both students and assessors, as demonstrated in the sample question below:
Name a hazard and/or environmental concern in the work area and choose the most effective hazard control hierarchy.
Possible answers can include, but are not limited to:
Weather conditions – work area isolation, engineering, PPE
Work area and ground conditions – elimination, isolation, use of engineering controls
People – isolation, engineering, administrative controls
Structural hazards – substituting, isolation, use of engineering controls
Chemical hazards – isolating, use of engineering controls, administrative controls
Equipment or machinery – isolating, use of engineering controls, administrative controls
Steering clear of double-barrelled questions makes it easier for students to respond and for assessors to judge student competence accurately.
Considering these requirements, you might think, “Don’t learning resource developers have audit guarantees?” However, such guarantees require you to wait for an audit to rectify noncompliance. This affects your compliance history, so it’s better to take a safe and compliant approach.